8th International Conference on Advanced Power System Automation and Protection (APAP2019)

1066 / 2019-05-20 06:35:55

Fault Protection Strategy and Switching Overvoltage in a 500 kV MMC-HVDC Grid

Fault protection strategy,hybrid dc circuit breaker,MMC,switching overvoltage

The Zhangbei ±500 kV modular multi-level converters (MMC)-based high voltage direct current (HVDC) project to be built in China will use overhead transmission lines with dc circuit breakers (DCCBs). However, the operating characteristics of DCCBs in MMC-HVDC systems are still not clear. In this paper, a four-terminal MMC-HVDC grid with detailed hybrid DCCB models is built and the fault protection strategy is proposed to study the switching overvoltage. The results indicate that fault protection strategy can protect the equipment and cause the overvoltages varying due to the change of the fault location. For the fault without protection, the overvoltage of three-phrase grounding fault at the valve side of the converter is the largest, which is 1295.2 kV (2.6 p.u.). For the fault with protection, the overvoltage of line-to-line fault is the largest, which is 1206.8 kV (2.41 p.u.). The theoretical analysis indicates that the outlet voltage of the converter increases when the DCCBs open because it is the superposition of the voltage of the line reactance and the residual voltage of the arrester, which is consistent with simulation analysis. The results can provide references for the application of DCCBs and construction of MMC-HVDC grids.