Timetable
Timezone：Asia/Shanghai
Day 3,Sep. 13, 2022Tuesday
| S4-1 |
Manufacuring Mathods-1@Manufacturing Methods13 Sep 2022, 14:00-17:30 ZOOM Conference Enter meeting room Timetable V11 Updated：14 Sep 2022, 11:03 |
|||
| Start | End | Duration | ID | Title |
|---|---|---|---|---|
| Chair：Xinyun Wang，Mao Zhang | ||||
| 14:00 | 14:30 | 30 | 229 |
Principle and technology for forming in-plane rings from a metal strip
Hongwei Li/Northwestern Polytechnical University
|
| 14:30 | 14:45 | 15 | 77 |
Optimum arrangement of rubber layout for stretch bending method to improve the shape accuracyTakayuki Muranaka/National institute of technology,Fukui college
|
| 14:45 | 15:00 | 15 | 72 |
Research on forming limit of Ni-based superalloy during spinning under complex strain pathGangfeng Xiao/South China University of Technology
|
| 15:00 | 15:15 | 15 | 58 |
Research on densification mechanism of Inconel 718 alloy miniature gear by electric field-assisted sinteringLiyong Ma Dr./Beihang University
|
| 15:15 | 15:30 | 15 | 59 |
Central defects evolution of Ti-6-Al-4V alloy with large area reduction during flat Cross Wedge RollingMingjie SHI PhD student/USTC-University of Science and Technology of China,IMR CAS-Institute of Metal Research, Chinese Academy of Sciences
|
| 15:30 | 15:45 | 15 | 230 |
Prediction and prevention of flange wrinkling defects in conventional spinning of thin-walled parts
Shuwan Chen/Northwestern Polytechnical University
|
| 15:45 | 16:00 | 15 | Break | |
| 16:00 | 16:30 | 30 | 137 |
Short Hot Stamping Process of Ultra-High Strength SteelsJunying Min/Tongji University
|
| 16:30 | 16:45 | 15 | 54 |
Effect of in-situ transverse magnetic field on the fluid flow, microstructure evolution and corrosion resistance of 316L stainless steel fabricated by GMAW-CMTYang Zhong PhD Student/amp,State Key Laboratory of Materials Processing and Die &, Mould Technology, Department of Materials Science and Engineering, Huazhong University of Science and Technology
|
| 16:45 | 17:00 | 15 | 157 |
An application exploration of flexible skew rolling a rail car axleLin Longfei/University of Science and Technology Beijing
|
| 17:00 | 17:15 | 15 | 75 |
Development of a multi-container extrusion method for extruding lightweight wide plates and sheetsWeishu Li PhD Student/Imperial College London
|
| 17:15 | 17:30 | 15 | 74 |
Forgeability characterization of multi-material based Functional Graded Materials manufactured through Friction Stir ConsolidationAbdul Latif PhD Student/University of Palermo
|
| S4-2 |
Manufacuring Mathods-2@Manufacturing Methods13 Sep 2022, 18:30-21:30
Timetable V11 Updated：14 Sep 2022, 11:03 |
|||
| Start | End | Duration | ID | Title |
|---|---|---|---|---|
| Chair：Hongwei Li，Junying Min | ||||
| 18:30 | 19:00 | 30 | 16 |
Titanium Clad Plate Forming: Critical Consideration and How Different it is from Solid Titanium FormingTrushar Parmar Assistant Manager- D/amp, Toubro Ltd.,Heavy Engineering IC, Larsen &
|
| 19:00 | 19:15 | 15 | 57 |
Smart roll forming and its applicationYONG SUN/UESTC
|
| 19:15 | 19:30 | 15 | 156 |
Investigation of the influence of material and sheet thickness on a three-stage process chain for cold forming of micro gears with a module of 0.1 mmMiriam Leicht research assistant/Friedrich-Alexander-Universität Erlangen-Nürnberg
|
| 19:30 | 19:45 | 15 | 69 |
Evaluation on Dimensional Stability of Cf/AZ91D Composite Based on the micro-yield StrengthKang Yun/Northwestern Polytechnical University
|
| 19:45 | 20:00 | 15 | 56 |
A New Dieless Forming Method for Metal Bellows Induced by Local Thermal BucklingTianyin Zhang/Shanghai Jiao Tong University
|
| 20:00 | 20:15 | 15 | Break | |
| 20:15 | 20:45 | 30 | 180 |
Advances on manufacture methods for wide lightweight aluminium stiffened panelsZhe Zhang/Imperial College London
|
| 20:45 | 21:00 | 15 | 78 |
Study of the Deformation Behaviour of the Zn-Al-Mg Coated Steel Sheet aimed for Tubular Products Application.Marcin Kwiecien/AGH Krakow
|
| 21:00 | 21:15 | 15 | 63 |
A straightening process of rotating bending for small and medium-sized shaft and pipe partsQingdang Meng/Yanshan University
|
| 21:15 | 21:30 | 15 | 70 |
Study on twist defect of thin-walled components with asymmetric section in roll formingJiaojiao Cheng/University of Science and Technology Beijing
|
Day 4,Sep. 14, 2022Wednesday
| S4-3 |
Manufacuring Mathods-3@Manufacturing Methods14 Sep 2022, 14:00-18:00 ZOOM Conference Enter meeting room Timetable V11 Updated：14 Sep 2022, 11:03 |
|||
| Start | End | Duration | ID | Title |
|---|---|---|---|---|
| Chair：Liang Chen，Guofeng Wang | ||||
| 14:00 | 14:15 | 15 | 62 |
Spinning deformation mechanism of aluminum alloy cylinder with stiffenersYehui Meng/Shanghai Jiao Tong Uni.
|
| 14:15 | 14:30 | 15 | 191 |
Springback prediction model of Ti-6Al-4V tube warm bending based on JC modified model considering variable temperature fieldLe Wang/Zhejiang University
|
| 14:30 | 14:45 | 15 | 60 |
Research on Cross Wedge Rolling Forming Technology of Railway AxlesJunSheng XU Axle Process Supervi/TAI YUAN HEAVY INDUSTRY TRANSIT EQUIPMENT CO., LTD.
|
| 14:45 | 15:00 | 15 | 169 |
Development and Perspectives of Rolling of Rib Stiffened PlateYasir Alfawzan PhD Student/Imperial College London
|
| 15:00 | 15:15 | 15 | 64 |
High-velocity forming of sheet metals: Electric-pulse triggered energetic materials formingXueyun Xie/Harbin Institute of Technology
|
| 15:15 | 15:30 | 15 | 55 |
Integrated fabrication and joining of NiAl/TiAl intermetallic by Additive Sintering Hanwei Ning/Harbin Institute of Technology
|
| 15:30 | 15:45 | 15 | Break | |
| 15:45 | 16:00 | 15 | 183 |
Investigation on laser removal of oxide film on 2219 aluminum alloy surface under vacuum condition oriented towards additive forgingJiang Guo/Dalian University of Technology
|
| 16:00 | 16:15 | 15 | 232 |
Precipitation behavior during aging and mechanical properties of Si3N4/6061Al composite processed by sintering and hot extrusionZhigang Li/Shandong University
|
| 16:15 | 16:30 | 15 | 231 |
On the fatigue crack initiation in metallic sealing rings: from manufacture to service
Pandi Zhao/Northwestern Polytechnical University
|
| 16:30 | 16:45 | 15 | 67 |
A study on electric pulse treatment of stainless steel constructive forming processTian Han Student/Wuhan University of Technology
|
| 16:45 | 17:00 | 15 | 182 |
A study of the formability of stainless steel foils during micro deep drawingLing Li Graduate Student/Taiyuan University of Technology
|
Important Date
-
Conference Date
Sep 11
2022
toSep 14
2022
-
Jan 31 2022
Abstract Submission Deadline
-
Feb 10 2022
Abstract Notification of Acceptance
-
May 01 2022
Draft paper submission deadline
-
Jun 01 2022
Draft Paper Acceptance Notification
-
Jun 01 2022
Final Paper Deadline
-
Aug 31 2022
Contribution Submission Deadline
-
Sep 30 2022
Registration deadline
Sponsored By
AGH University of Science and Technology
University of Palermo
Toyohashi University of Technology
Yokohama National University
Contact Information
Contact Information
Tips
Coming soon to a third-party domain
