Identification of Faulted Blade and Pitch Error Direction Based on Load and Deformation Analysis of Wind Turbine Blades
ID:189 View Protection:ATTENDEE Updated Time:2026-10-19 18:11:04 Hits:69 Poster Presentation

Start Time:Pending(Asia/Shanghai)

Duration:Pending

Session:No Session »

No files

Abstract
This paper presents a novel method for identifying the faulted blade and the direction of its pitch error in wind turbines based on the analysis of blade loads and deformations. Using the commercial software GH-Bladed 3.82, comprehensive simulations were conducted on a 1.5 MW wind turbine (AE40.25-Y2) under IEC 61400-1 standard DLC 1.1 conditions, encompassing 1215 simulation cases with 45 reference wind speeds and 27 pitch error configurations. The study reveals that when a blade has a positive pitch error, its load and deformation under all normal operating conditions are consistently smaller than those of the other two normally installed blades, and vice versa for negative pitch errors. A sorting-based comparison method is proposed to determine which blade may have a pitch error and the direction of the deviation angle, even in the presence of measurement deviations. The proposed method requires only the average load or deformation data of the three blades, making it practical for real-time monitoring .
Keywords
wind turbine,pitch error,blade load,blade deformation,faulted blade identification
Speaker
Wei Deng
Senior Engineer Xi’an Thermal Power Research Institute Co. Ltd

Submission Author
Jin Xu Xi'an Thermal Power Research Institute Co., Ltd
Wei Deng Xi’an Thermal Power Research Institute Co. Ltd
Zhiwen Tian Xi'an Thermal Power Research Institute Co., Ltd
Chong Li Xi’an Thermal Power Research Institute Co. Ltd
Bufeng Xu Xi'an Thermal Power Research Institute Co.; Ltd
Submit Comment
Verify Code Change Another
All Comments
Important Date
  • Conference Date

    Nov 06

    2026

    to

    Nov 08

    2026

  • Oct 15 2026

    Draft paper submission deadline

  • Nov 10 2026

    Registration deadline

Sponsored By
IEEE Instrumentation and Measurement Society
Organized By
Sichuan University